BAG PRINTING NOTES AND INSTRUCTIONS

A handbag is a simple bag made of materials such as paper, plastic, and non-woven industrial cardboard. Handbags, also known as handbags, handbags, etc., are commonly used by manufacturers to store products; Some also display gifts when giving gifts; Many fashionable and avant-garde Westerners also use handbags as bag products, which can be matched with other outfits. Therefore, they are becoming more and more popular among young people, and as they use more, the demand increases. 

At this time, which company has the best quality for printing handbags is a concern for everyone, Below is a summary of the following experiences for your reference: Firstly, you should know that when printing handbags, it is important to only use the same type of ink, different types of ink, and different properties of ink together because poor compatibility can affect the quality of handbag printing. Secondly, when printing handbags, it is important to avoid direct sunlight and maintain indoor temperatures between 10 and 26 degrees Celsius. Furthermore, during the printing process of the handbag, it is important to frequently stir the ink, otherwise it can easily bond and directly affect the quality and effect of the handbag. At the same time, it is also important to avoid mixing too thinly, otherwise color difference may occur. Next, during printing, water should be utilized to better balance the pH value and control the viscosity of the ink. If the pH value of the ink exceeds the range of 8.5 to 9.5, water should be added to adjust the pH value. 

Additionally, the speed of handbag printing is quite fast, which requires that the dryness of the ink should also keep up with that. If it is found that the drying of the ink is too slow, an appropriate amount of desiccant can be added to increase the drying speed of the ink, Printing before the ink is dry can easily result in dirty and sticky hand bag prints.

After completing the printing of the handbag, it is important to remember to clean the printing equipment. It is worth noting that cleaning should be carried out while the equipment is still in a viscous state, which can facilitate cleaning. If it is difficult to clean with clean water, some cleaning agent can be added.